Tech Talk for Suzuki owners.
Moderators: lay80n , sierrajim
Posts: 9393 Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane
Post
by antt » Fri May 28, 2004 1:22 pm
how do ya get the long axle out of the passenger side of the front vitara diffs, the one with the triangular flange on the end?
Posts: 1275 Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney
Post
by Gonzo » Fri May 28, 2004 2:56 pm
big hammer?
angle grinder?
Posts: 1275 Joined: Mon Jan 13, 2003 10:32 pm
Location: Sydney
Post
by Gonzo » Fri May 28, 2004 3:01 pm
the way dave got this axel out ?
Posts: 9393 Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane
Post
by antt » Fri May 28, 2004 3:01 pm
already tried the big hammer
Posts: 2031 Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...
Post
by Damo » Fri May 28, 2004 3:30 pm
antt wrote: :finger: already tried the big hammer
Gas axe?
Posts: 9393 Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane
Post
by antt » Fri May 28, 2004 3:31 pm
you lot suck.....that is all
Posts: 2031 Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...
Post
by Damo » Fri May 28, 2004 3:43 pm
antt wrote: you lot suck.....that is all
That may be so, but your axle still isn't out is it
Sucks to be you, Whippersnapper
Posts: 9393 Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane
Post
by antt » Fri May 28, 2004 3:46 pm
Damo wrote: antt wrote: you lot suck.....that is all
That may be so, but your axle still isn't out is it
Sucks to be you, Whippersnapper
its not urgent, its my spare diff anyway
Posts: 2031 Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...
Post
by Damo » Fri May 28, 2004 3:51 pm
antt wrote: Damo wrote: antt wrote: you lot suck.....that is all
That may be so, but your axle still isn't out is it
Sucks to be you, Whippersnapper
its not urgent, its my spare diff anyway
Teenagers, they've always got an answer for everything
Posts: 9393 Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane
Post
by antt » Fri May 28, 2004 3:56 pm
Posts: 2031 Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...
Post
by Damo » Fri May 28, 2004 4:11 pm
I knew that, but you sounds like one, and you're closer to bein' one than I am
Posts: 107 Joined: Fri Jan 23, 2004 9:08 am
Location: Brisbane
Post
by GV_Qld » Fri May 28, 2004 6:02 pm
A few taps of a hammer, just a surclip that holds it in.
'03 GV
Posts: 2296 Joined: Thu Oct 24, 2002 4:30 pm
Post
by OVERKILL ENG » Fri May 28, 2004 8:06 pm
SAS
OVERKILL ENGINEERING
www.overkill4x4.com
Posts: 9393 Joined: Tue Oct 29, 2002 11:51 am
Location: Brisbane
Post
by antt » Sat May 29, 2004 10:53 am
sam
i'll give it a go today
Users browsing this forum: No registered users and 0 guests