Page 1 of 1
T700 to Lux Transfer Adaptor
Posted: Tue Feb 04, 2003 10:12 am
by TOYrantula
Howdy All,
A mate has a 262 Chev in his Lux and is sic of replacing the gearbox all the time. He is currently looking into using a T700 box and is sourcing a local place (SE Qld) as to where he can get the adaptor to mount to his trnafer case. His lux is YN65.
Any help would be appreicated.
Regards,
Damien
Posted: Tue Feb 04, 2003 6:22 pm
by v8zuki
i can get u one about $950 call me at work 32562200
Posted: Tue Feb 04, 2003 7:12 pm
by RUFF
Mick is that for a box with an adapter?
Posted: Tue Feb 04, 2003 10:23 pm
by Punchy
sounds like a marks adaption kit
thats what i want for my chev into hj75 series
Posted: Fri Feb 07, 2003 11:09 am
by v8zuki
just the adaptor we are agents for marks 4wd
Posted: Fri Feb 07, 2003 12:31 pm
by TOYrantula
Thanks. I passed your number on to him the other day, he was bout to order it from marks. So you may/may not get a call.
Regards,
Damien
Posted: Fri Feb 07, 2003 6:28 pm
by RUFF
You can make an adapter for under $100 and then all you need to do is get the shaft cut and re-splined and that should cost around $80.
Posted: Fri Feb 07, 2003 7:29 pm
by TOYrantula
Really? Well I'll keep that in mind for if and when my box goes and am after something stronger.
He isn't that mechanically minded and prefers buying off the shelf stuff.
Thanks anyway
Posted: Fri Feb 07, 2003 8:13 pm
by RUFF
I beleive Richard at 4x4 engineering can also make these adapters for a lot less than marks.