Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

T700 to Lux Transfer Adaptor

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 65
Joined: Wed Oct 23, 2002 7:45 pm
Location: Blackwater

T700 to Lux Transfer Adaptor

Post by TOYrantula »

Howdy All,

A mate has a 262 Chev in his Lux and is sic of replacing the gearbox all the time. He is currently looking into using a T700 box and is sourcing a local place (SE Qld) as to where he can get the adaptor to mount to his trnafer case. His lux is YN65.
Any help would be appreicated.

Regards,
Damien
Don't let you mind wander...it is too little to be out there by itself.
Top
Posts: 595
Joined: Sat Nov 02, 2002 2:09 pm
Location: Blackbutt, Queensland

Post by v8zuki »

i can get u one about $950 call me at work 32562200
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Mick is that for a box with an adapter?
Top
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

sounds like a marks adaption kit
thats what i want for my chev into hj75 series
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Top
Posts: 595
Joined: Sat Nov 02, 2002 2:09 pm
Location: Blackbutt, Queensland

Post by v8zuki »

just the adaptor we are agents for marks 4wd
FOR SALE hilux parts all models
have most parts available from early to late
call mick 0415156693
Top
Posts: 65
Joined: Wed Oct 23, 2002 7:45 pm
Location: Blackwater

Post by TOYrantula »

Thanks. I passed your number on to him the other day, he was bout to order it from marks. So you may/may not get a call.

Regards,
Damien
Don't let you mind wander...it is too little to be out there by itself.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

You can make an adapter for under $100 and then all you need to do is get the shaft cut and re-splined and that should cost around $80.
Top
Posts: 65
Joined: Wed Oct 23, 2002 7:45 pm
Location: Blackwater

Post by TOYrantula »

Really? Well I'll keep that in mind for if and when my box goes and am after something stronger.
He isn't that mechanically minded and prefers buying off the shelf stuff.
Thanks anyway
Don't let you mind wander...it is too little to be out there by itself.
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

I beleive Richard at 4x4 engineering can also make these adapters for a lot less than marks.
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 22 guests