Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

6:5 gears VS 1ltr tcase on road

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

6:5 gears VS 1ltr tcase on road

Post by mrRocky »

Hmmm just swapped my 6:5 tcase which is supposed to be 20% lower than standard in high, with a 1ltr case and it hasnt changed the revs on road at all. Is that right. Do i have to change diff gears if i want to lower the on road revs a bit ?
_____

[olllllo]
Posts: 977
Joined: Sun Jul 20, 2003 7:57 pm
Location: Brisbane

Re: 6:5 gears VS 1ltr tcase on road

Post by Gutless »

mrRocky wrote:Hmmm just swapped my 6:5 tcase which is supposed to be 20% lower than standard in high, with a 1ltr case and it hasnt changed the revs on road at all. Is that right. Do i have to change diff gears if i want to lower the on road revs a bit ?
Mate your 6.5 case IS 20% lower in high range. Unfortunately for you, its 20% lower than a 1.3L case. A 1L case is 12% lower than a 1.3L case from factory. So really, with the 6.5 case, you are really only 8% or so lower than a standard 1L case.

:D
[url]www.twinstickoffroad.com[/url]
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

thats freaky-weird!

my 5.14 tcase is 18.3% (i think) reduction hi-range and has brought my RPM back very close to stock... maybe check the specs on where you got the 6.5's from - perhaps the low range is lower but the high range isnt as low? (doubt it though).

Why'd you change to the 1L case anyway?
The worst thing about censorship is ███████.
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

what else did you change at the time?
tyres etc?
and how are you measuring the speed ?
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

sitting on 85 on the speedo (92 on gps) my tacho reads 3900rpm
before and after i swaped back to the 1ltr case.
Its really annoying, i want to be able to sit on 100 on the speedo doing about 3900rpm not at 85. I will put the 6:5's back in when i want to go crawling or do comps but the at the moment its weekends away that are on the agenda and 85 is a major p.i.t.a.
_____

[olllllo]
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

thats bizarre!!

So you're running 31's, and 1L tcase and doing 3900rpm at 92km/hr? Being a NT - are your diffs 4.11??? diffs would be the only other thing to check.
The worst thing about censorship is ███████.
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

I think mrRocky's car is a Maruti so 4.1 diffs.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

yeah i have 4.1 diffs coming out my ears. If i drop to 3.9's will that make a noticeable difference.
_____

[olllllo]
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

that'd do it... Nicbeer runs 1L tcase and 4.11 diffs and 31s on his - maybe he can chime in with RPMs at speeds? (or you could PM him)
The worst thing about censorship is ███████.
Posts: 17
Joined: Sun Jan 04, 2009 5:52 am
Location: brisbane

Post by wb800 »

4.1 diffs 1ltr transfer 31" tyres on mine in 5th gear is 100 @ 3500
in 4 gear 100 is 4000 on the GPS
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

maybe i have a earlier 5 spd if i sit on 100 on the speedo engines reving at about 4300 rpm, stupid mutant car.
wheres gwagonsteve with all the answers when you need him
_____

[olllllo]
Posts: 5714
Joined: Fri Nov 22, 2002 3:55 pm
Location: Perth WA.

Post by nicbeer »

used to run the 1ltr case til i took it out to rebuild a while ago....

running 3.9s and std 1.3 transfer and 31s equals about 4k at 100 from memory
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

hey mr rocky, did you go from a 12% (1lt) case to a 20% case expecting it to lower the revs :? what gearbox are you using? my numbers say at 100ks with 31s, 4.1diffs, .864 5th and 1.58 maruti tranfer you should be revving at 3761 rpm. if you go to a 3.7, it will drop it to 3394rpm. but these numbers are well down on what you say you are getting.
when i did the 1.6 and 5speed in to my maruti it was still screaming in pain at 100. changed to 3.7 and made it a lot more comforable ( no tacho, just going buy noise). this has been on stock tyres for 18 months and has been ok. i trialed some 265/70/15 on it last week and i think the gearing in high range is perfect. by the calculator its at 3554 rpm at 100.
hope some of this helps
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

mrRocky wrote:yeah i have 4.1 diffs coming out my ears. If i drop to 3.9's will that make a noticeable difference.
4.1/3.9 = 1.05.

so this would change your revs by 5% so instead of 85km at 3900 your would do 89km/h. so sweet fark all.

sierra gearing is a PIA.

some one metioned 0.864 5th gear as well. didnt most 5 speeds come out with an approx 0.78 - 0.79 5th gear?
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

ok, i went from a 1ltr 4 spd with 4.1 diffs and 6:5 tcase, to a 1.6 baleno with mystery 5spd and now back to the 1ltr case to try and lower the revs which with an extra gear and a 1ltr case i thought it would make a bigger differance.
just got an 89 hardtop so i might swap the diffs over, will they be 3.7 or 3.9 in the hardtop.
_____

[olllllo]
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

wait for it
Last edited by mr green on Sat Jan 16, 2010 12:04 am, edited 1 time in total.
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Posts: 357
Joined: Fri Sep 16, 2005 9:30 am
Location: Tamworth

Post by mr green »

89 should be early wt, so 3.7.
going from 4.1 to 3.7 is what your after. should drop your revs by about 400rpm.
ps. is there any chance your 31 measure about 28?
WANTED: swb vitara rear seat. the 3 seater bench type
for sale: wt diffs, snake hi steer, maruti 4.1 wt centres,
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

mr green wrote:ps. is there any chance your 31 measure about 28?
thats a good point
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

hmm there 31" maxxis buckshots with about 45% tread so i think its more like 30's.
_____

[olllllo]
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests