Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Pics needed: Any diesel surf or lux 2.8 or 2.4 with a/c.

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Pics needed: Any diesel surf or lux 2.8 or 2.4 with a/c.

Post by Zookified »

Hey everyone,

I have bought a second hand a/c setup off a ln106 diesel to go into my lux. I have all the gear needed to do it myself. I am just chasing a couple of pics of where the receiver/dryer goes and what piping goes from where to where.

At the moment I have the condensor in and the compressor mounted up.

Any pics would be a great help if you have some.


Cheers.
Top
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

If you want you can have a look at mine as I'm in gympie aswell send me a PM if you want to have a look
Top
Posts: 616
Joined: Tue Mar 29, 2005 6:56 pm
Location: Gympie

Post by Zookified »

Cheers for the offer Matt, will see how I go. Got most of it in thismorning after having a better go at it. Still need to put in the evaporator under the dash and fit the belt.

Do you run the idle up valve or whatever it is? The bit of gear with the vacuum lines that lifts the idle when the a/c is switched on.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests