Which would be more useful, a home made battery box or buying a new jump starter?
My current jump starter has crapped itself due to lack of use (didn't keep the battery charged).
Whichever I choose it would be used to jump start my Suzi plus power for lighting etc.
I can assemble a battery box easily enough and can then build it to suit my needs. Or would a jump starter be just as good?
What type of battery would be best to use - SLA, AGM, flooded cell? Even though a SLA is a deep cycle can it be used to jump start a 4 cylinder engine?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Home made battery box or jump starter
Moderator: -Scott-
Re: Home made battery box or jump starter
Without knowing a lot about them, I've never been keen on the "jump starter" packs. I guess I don't trust the combination of price point and the typical claims, so I've always regarded them as a cheap & nasty solution. As I said, I've never looked closely, so take that opinion as you will. That's the "disclosure" bit.TheOtherLeft wrote:Which would be more useful, a home made battery box or buying a new jump starter?
My current jump starter has crapped itself due to lack of use (didn't keep the battery charged).
Whichever I choose it would be used to jump start my Suzi plus power for lighting etc.
I can assemble a battery box easily enough and can then build it to suit my needs. Or would a jump starter be just as good?
What type of battery would be best to use - SLA, AGM, flooded cell? Even though a SLA is a deep cycle can it be used to jump start a 4 cylinder engine?
Personally, I would build a custom battery box, so I know exactly what's in it, and what to expect from it.
I would choose an AGM with a good CCA rating, because AGMs tend to have excellent power density (Ah per volume), and they typically suffer most from high underbonnet temperatures - which I presume won't be an issue here.
A large SLA may have enough CCA to start your Suzi, but I wouldn't want to rely on it, particularly if your Suzi can be hard to start (i.e. you might get away with a short burst, but I wouldn't try prolonged cranking.)
SLA's poop themselves very early on if you use them for jump starting too often. Simply not designed for it, but doing it once or twice a year would be acceptable.
As Scott said, go with an AGM
As Scott said, go with an AGM
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Who is online
Users browsing this forum: No registered users and 3 guests