Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gearbox Bush Woes

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Gearbox Bush Woes

Post by bakerboy »

I know its for a mitsi but thought here would be better suited for any other options for the problem

ok so there are 2 bushes used to secure the box in an NG V6 5spd, one on the bottom crossmember, a rectangular shaped bush, and another located on the side, a round one with a bolt through it. Any one have any idea where i can get it from, wreckers have no idea and covs gave me a part number that turns out to be and engine mount of a similar description.

Could i booty fab a bush up? And if so what should i make it from?

Cheers
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

Have you tried genuine? Sometimes they are suprisingly cheap for some parts. If not, you can make up youre own, but you wont be able to make it from rubber. Best option is to buy a brick of something like Nolathene and carve the shape outta that. Or try to get another bush that looks similar. Or take the old bush to wreckers and match it off another Mitsu there.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
User avatar
RAY185
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

Wierd that they are "bushes". They should be mounts. One is a gearbox mount and the other is a support.

Mount:
Image

Support:
Image

Kelpro make them both.
Gearbox Mount KELPRO MT8553
Transmission Support KELPRO MT8590

Neither of them are terribly expensive.
Top
Posts: 120
Joined: Tue Aug 11, 2009 11:53 pm
Location: Launceston, TAS

Post by wacky »

Under $130 from supercheap (2.5/4D56), cheaper for other engine/combos.
Top
Posts: 146
Joined: Thu May 07, 2009 3:10 pm
Location: Sunshine coast QLD

Post by Jonezy01 »

Did you try ripco or supercheap i got mine from car bitz for about $90
Top
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

cheers guys, its the support, ill give supercheap a go

by bushes i meant in effect like a round rubber bush

thanks again guys
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest