Nearly finished the spring over etc on my BJ42. I've used a snake histeer kit and very flat springs and with the 60s power steer box the pitman arm only sits a couple inches above the springs. This will obviously hit on right wheel up travel. My question is, Which is flatter, 75 or 80 series pitman arm and do they have the same throw? Long shot i know, but does any one have a pic of all three beside each other?
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60,75 and 80s pitman arm.
Moderators: toaddog, Elmo, DUDELUX
My 75 arm is from an early 75.. The later ones appear to be the same as 80 arms from pictures I've seen.. Theres probably nothing to be gained by using an 80 arm..
I have seen flat arms for sale somewhere, one of the popular local establishments I think, but if your spring shackle is in the stock location you probably wont need it..
I have seen flat arms for sale somewhere, one of the popular local establishments I think, but if your spring shackle is in the stock location you probably wont need it..
Who is online
Users browsing this forum: No registered users and 14 guests