checked the bible, its not there,
Does a wide track body fit of a narrow track chassis?
Thanx in advance guys....
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Wide track body
Wide track body
www.goldcoast4wd.com.au for all your Mods accecories, and custom barwork
It will depend. I recently rebodied an 84 LWB chassis with a SWB 92 body,
and the rear points, under the seat were all out buy about an inch. Is this
from LWB to SWB, 1lt to 1.3? some random suzuki difference?
Also something that has got me stumped, is there a difference between the chassis shapes? I used all the mounts from the 1.3 for engine, gearbox and radiator, and they were all welded in the same positions, but my radiator cap hits the bonnet and it wont close. I'm able to shave some of the reinforcing to get it to work, but I'm not sure why it just didn't.
and the rear points, under the seat were all out buy about an inch. Is this
from LWB to SWB, 1lt to 1.3? some random suzuki difference?
Also something that has got me stumped, is there a difference between the chassis shapes? I used all the mounts from the 1.3 for engine, gearbox and radiator, and they were all welded in the same positions, but my radiator cap hits the bonnet and it wont close. I'm able to shave some of the reinforcing to get it to work, but I'm not sure why it just didn't.
Who is online
Users browsing this forum: No registered users and 1 guest