hi people help needed
for GQ diffs it for a comp truck
Wish is the best bearing to use???????????
WHAT is the best one for comp??.
or is there one at all ??
or are they just the same as NYK
THANKS FOR HELPING OUT WITH THIS!!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
bearings for gq wish the the best ones
Moderators: toaddog, TWISTY, V8Patrol, Moderators
The only variations in bearings you have are brands.
Quality wise you work from European (Timken, Torrington, Skf, Grimace) Then its your Japanese brands (Nachi, NSK, NTN, koyo). then chinese.
Your GQ (if its disk rear) runs a expensive bearing assembly in the rear so you dont have many options of who makes them.
For the conditions your going to be running them in preventative maitenence is the key, your main problem is going to be seals. As soon as they start wearing out your going to flog out your bearings. If you remove flush and repack your bearings regulary and replace the seals you will have years of hassle free rolling.
A workmates father still has the original wheel bearings in his 77 fairlane, because every twelve months, he removes, flushes and repacks the grease and changes the seal.
weaves.
Quality wise you work from European (Timken, Torrington, Skf, Grimace) Then its your Japanese brands (Nachi, NSK, NTN, koyo). then chinese.
Your GQ (if its disk rear) runs a expensive bearing assembly in the rear so you dont have many options of who makes them.
For the conditions your going to be running them in preventative maitenence is the key, your main problem is going to be seals. As soon as they start wearing out your going to flog out your bearings. If you remove flush and repack your bearings regulary and replace the seals you will have years of hassle free rolling.
A workmates father still has the original wheel bearings in his 77 fairlane, because every twelve months, he removes, flushes and repacks the grease and changes the seal.
weaves.
Who is online
Users browsing this forum: No registered users and 2 guests