Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

part time 4x4

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 4
Joined: Thu Dec 10, 2009 4:42 pm
Location: keilor

part time 4x4

Post by westy_88 »

hey guys and girls
what are the pros and cons of converting an 80 series to part time 4wd also what should it cost
cheers westy
Posts: 1912
Joined: Sat Feb 14, 2009 7:15 pm
Location: VIC

Post by beinthemud »

A mate of mine is doing this conversion , Its good in theory
Manuels= 4wd,cars,bikes,guns,trucks,race cars
Automatics=washing machines,dish washers,fridges
Posts: 64
Joined: Wed Aug 10, 2005 9:49 pm
Location: Sunshine Coast

Post by falco80 »

Google it westy, there is hours worth of reading. Short story - it's great to eliminate drive-line clunking, especially in pre-95 80's, and also lets you put an auto locker in the front diff. Don't fit it and expect an increase in fuel economy though. You can buy the kit for $500-$550 and fit it in your driveway.
Dan
1979 BJ40
Posts: 11
Joined: Tue Aug 19, 2008 11:29 am
Location: HOME

Post by cruzinto »

Hi there westy I put the part time kit in my GXl last year eliminated 95% of driveline lash the constant 4x4 had and i dont get the slight torque steer it had,mine's a petrol and I thought the fuel economy was a little better than before by about 1.5lt to 100km so definately worth the $500 odd dollars plus the fitting to have it done hope this helps.
Posts: 4
Joined: Thu Dec 10, 2009 4:42 pm
Location: keilor

Post by westy_88 »

cheers guys
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests