Can anyone tell me if the injectors on a 12h-t are supposed to have a rubber o-ring in the machined groove half way down them to stop water and crud getting down there?
Had them overhauled about 10k ago and pulled them out this arvo to find none, doesn't seem right to me, anyone know what the story is?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
12h-t injector question
Moderators: toaddog, Elmo, DUDELUX
12h-t injector question
LN106 1uzfe - 33's - crawlers - locker
HJ61 Sprung over -20psi - 35's - dual locked
HJ61 Sprung over -20psi - 35's - dual locked
Who is online
Users browsing this forum: No registered users and 1 guest