Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Disco TDI power stearing, what thaa

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 36
Joined: Wed Apr 13, 2005 9:00 pm
Location: Melbourne

Disco TDI power stearing, what thaa

Post by lariens »

Looks like the power stearing pump has died. First I thought it was just the belt cut down to half width not having enough pressure to drive however after checking bearings etc I found the pump pully and shaft slide towards the fan. Can it be fixed or would is it common for the shaft to snap or something inside?
Do I throw away and spend big $$$$ on a new or second handy?
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Re: Disco TDI power stearing, what thaa

Post by Loanrangie »

lariens wrote:Looks like the power stearing pump has died. First I thought it was just the belt cut down to half width not having enough pressure to drive however after checking bearings etc I found the pump pully and shaft slide towards the fan. Can it be fixed or would is it common for the shaft to snap or something inside?
Do I throw away and spend big $$$$ on a new or second handy?
They are not rebuidable, mine did exactly the same replaced the belt and it shredded straight away- wasted $30. bought a new pump from the UK for $110 and belt for $12 and had it airfreighted to me at work for nix.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 36
Joined: Wed Apr 13, 2005 9:00 pm
Location: Melbourne

Post by lariens »

Yep the keyway had exploded inside, found a new 1 for $265 couldnt wait needed it same day. almost shred the new belt too. the tension pully was making the belt run off course. had to cut one of the v runs off because it got damaged! hmmm.
Top
Posts: 36
Joined: Fri Apr 04, 2008 6:25 am
Location: OLD South Wales

Post by Welsh_farmer »

If it is just the bearings that are shot then they can be rebuilt. But it is not that straightforward and the number of Discos being scrapped in the UK at the mo its possible to pick one up for peanuts. Perhaps I should start freighting spares to Australia! ;)
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Welsh_farmer wrote:If it is just the bearings that are shot then they can be rebuilt. But it is not that straightforward and the number of Discos being scrapped in the UK at the mo its possible to pick one up for peanuts. Perhaps I should start freighting spares to Australia! ;)
Its a waste putting a 2nd hand ps pump on when they are only 50 odd pounds new, i bought stuff from Island 4x4 in Kent and although i got free freight thru work, what they quoted was pretty reasonable.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests