Page 1 of 1

lift kit / rear staybolts

Posted: Wed Mar 10, 2010 9:26 am
by rokbebop
hi

when performing a body lift on a fez, how does one go about removing those bolts at the very back of the vehicle? These are the two bolts under the rear bumper and lights. As far as I can tell these bolts cannot be accessed from above. In the guide from warfs i says to remove them 'by way of nut'. how do i use a nut to remove these bolts

thanks

Posted: Wed Mar 10, 2010 3:16 pm
by MightyMouse
IIRC they are studs.

Get 2 nuts then screw them onto the stud. Tighten them against each other.

Spanner on "inside" nut - screw the stud out.

Replace with a bolt of appropriate length.

Posted: Wed Mar 10, 2010 11:46 pm
by rokbebop
thats what i figured but i didnt want to try it without knowing. it worked. thanx