Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

lift kit / rear staybolts

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 43
Joined: Wed Sep 02, 2009 7:47 pm
Location: adelaide

lift kit / rear staybolts

Post by rokbebop »

hi

when performing a body lift on a fez, how does one go about removing those bolts at the very back of the vehicle? These are the two bolts under the rear bumper and lights. As far as I can tell these bolts cannot be accessed from above. In the guide from warfs i says to remove them 'by way of nut'. how do i use a nut to remove these bolts

thanks
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

IIRC they are studs.

Get 2 nuts then screw them onto the stud. Tighten them against each other.

Spanner on "inside" nut - screw the stud out.

Replace with a bolt of appropriate length.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 43
Joined: Wed Sep 02, 2009 7:47 pm
Location: adelaide

Post by rokbebop »

thats what i figured but i didnt want to try it without knowing. it worked. thanx
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 28 guests