yep, I'm trying to find out if these have been changed from the old pin type end to an eye.
The Koni catalogue lists a different rear shock from VIN XA159807.
Can anyone confirm or deny this please ?
thanks,
Rick.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Def TD5 rear lower shock mounts
Moderator: Micka
can only confirm td5's (not extreme's) are still pin
i recently loked at the new 90 + 110 extemes to see the rover rear diff and didn't notice any changes, so i would say they are still pin mount.
you would think in the 20 years they have been makint these chassis and shock mounts that rover could design shocker mounts that actualllylet the rear shoch move in a plane that doesn't bind bushes
whats wrong with aligned eye mounts for the shocks so when the axle articulates the bushes move around , ie not crushing to the max to allow misalighnment.
david
i recently loked at the new 90 + 110 extemes to see the rover rear diff and didn't notice any changes, so i would say they are still pin mount.
you would think in the 20 years they have been makint these chassis and shock mounts that rover could design shocker mounts that actualllylet the rear shoch move in a plane that doesn't bind bushes
whats wrong with aligned eye mounts for the shocks so when the axle articulates the bushes move around , ie not crushing to the max to allow misalighnment.
david
Who is online
Users browsing this forum: No registered users and 3 guests