Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

seatbelts in a 2dr rangie

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 119
Joined: Mon Mar 24, 2008 1:56 pm
Location: melbourne

Contact:
Contact Ye Olde Rangie

seatbelts in a 2dr rangie

Post by Ye Olde Rangie »

Hi al, im building a 1981 2dr toy and was intrigued into how people run seatbelts in the front with different seats. Ihave 1997 disco interior inc. driver and passenger seats also a roll cage so is it easier to bolt to the cage or is this frowned upon?
1981 range rover- 4"coil + 2"body rollcage, disco interior and goes better than a pootrol
Top
Posts: 51
Joined: Fri Nov 14, 2008 2:20 pm
Location: Newborough

Post by team_little_legs »

i think i had a topic on this try a search on rangie seats
Top
Posts: 892
Joined: Sun Apr 27, 2003 11:48 pm
Location: Melbourne E/S

Post by RANUKI »

Be careful with this mod, the seats in a 2 door rangie are part of the integral roll system. They are the strongest and heaviest part of the car for a reason, you didnt think all that glass and pissy little pillars were going to save you in a roll over did you? Definatly fit the cage.

I did a sports seat conversion on mine years ago (caged of course), plates were welded into the 'B' pillers for the top mount and the regulators. Plates were also mounted under the floor for the buckle mounts.
[color=#FF0000][size=100][url]http://www.thecrawlpit.com[/url][/color] - Scale & Crawler Forum.[/size]
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 3 guests