hey,
I am planning a 350 chev straight gas conversion and am trying to sort out the front of the engine.
What is the best accessory setup to keep AC?
Can I use the ps and AC from the tb42?
There is two length water pumps, which is best?
I had a long look through the searches but couldnt find an answer to this part of the conversion.
All info appreciated.
cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
350 chev accessories in gq
350 chev accessories in gq
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body
Need an interstate courier? http://www.transdirect.com.au
Need an interstate courier? http://www.transdirect.com.au
Use a long water pump and make sure you get the accessory mounts to suit. Use standard early GM accessories. Early as in Gen I or II. Sanden compressor, any alternator and GM power steer pump.
You can buy every bracket to mount everything at various locations on front of engine. All new and all standard. Try to keep things either Nissan or GM. Keep the unique stuff to a minimum.
You can buy every bracket to mount everything at various locations on front of engine. All new and all standard. Try to keep things either Nissan or GM. Keep the unique stuff to a minimum.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests