Hi
I am new to this forum and have been very impressesd with the knowledge of most of the members. I am also very fortunate to have stumbled accross this site where there seems to be extensive knowledge on the use of Volvo axles in Range Rovers as I have just purchased a set. In South Africa, where I am based, no one has yet to undertake this conversion.
I have a 1983 Rangie that I use for local competitions. It is not road worthty and is used strictly off road. I am looking for advise on the suspension link setup for the portal axles, particulaly the front. What I had in mind is moving both axles +- 100mm forward to get better weight distribution and using a four link front with hydro steering.
I am looking for any suggestions on how to set up the links.
Looking forward to the ressponses.
Mike
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Volvo's in Rangie
Moderator: Micka
Hey, ex-Capetonian here....
Good to see OL has made it all the way to SA...
You might want to head over to www.pirate4x4.com and go read through Bellavista's tech atricles on suspenion design...
I am however pretty sure Bill, aka Daddylonglegs will be able to help...
Where do you guys go driving near Cape Town...
Good to see OL has made it all the way to SA...
You might want to head over to www.pirate4x4.com and go read through Bellavista's tech atricles on suspenion design...
I am however pretty sure Bill, aka Daddylonglegs will be able to help...
Where do you guys go driving near Cape Town...
Hi landy-man
Good to hear from someone from this part of the woods. Where are you based now?
There are many trails in the area, but the challenges mainly held in brick quarries etc.
I have been reading on the Pirate forum but am reluctant to post there in fear of a roasting. They are extremely intolerant of Newbies with "stupid" questions. I am sure that I will get more patience, understanding and information on Volvo axles here.
How do I post a pic? (I expect a roasting for this)
Mike
[/img]
Good to hear from someone from this part of the woods. Where are you based now?
There are many trails in the area, but the challenges mainly held in brick quarries etc.
I have been reading on the Pirate forum but am reluctant to post there in fear of a roasting. They are extremely intolerant of Newbies with "stupid" questions. I am sure that I will get more patience, understanding and information on Volvo axles here.
How do I post a pic? (I expect a roasting for this)
Mike
[/img]
seeing you are a Saffa i will not tell you to search NOOB 
when you reply at the bottom is add attachment..locate file etc...
i am now in Melbourne...used to live in Bantry Bay, then hermanus, then Bots... used to work for Drifters doing overlands
i know what you meen about pirate...
if you go to the actual website not the forum and into the tech section there is heaps of info
when you reply at the bottom is add attachment..locate file etc...
i am now in Melbourne...used to live in Bantry Bay, then hermanus, then Bots... used to work for Drifters doing overlands
i know what you meen about pirate...
if you go to the actual website not the forum and into the tech section there is heaps of info
ah so that's where you're from craig.
mike, the best thing to do is to start figuring out how you will go about this conversion. then ask specific questions to bill when you need to.
but hopefully soon my rangie will be going through this mod. i will try to take lots of photos. but the tech and knowledge will come from bill.
mike, the best thing to do is to start figuring out how you will go about this conversion. then ask specific questions to bill when you need to.
but hopefully soon my rangie will be going through this mod. i will try to take lots of photos. but the tech and knowledge will come from bill.
mike, you've come at an unlucky time because Outerlimits is having troubles with pictures again. :(
but there are a few pics of axles with suspension mounts welded already in this thread: http://www.outerlimits4x4.com/PHP_Modul ... hp?t=12640
when the pics are back up, see if you find them of any use. if you need other photos, i'm happy to oblige.
but there are a few pics of axles with suspension mounts welded already in this thread: http://www.outerlimits4x4.com/PHP_Modul ... hp?t=12640
when the pics are back up, see if you find them of any use. if you need other photos, i'm happy to oblige.
mike, I personally do not see any great benefit in 4 link for strictly off road work . a properly sorted 3link as on the 110 I converted handled well on road and under the heavy braking test that was required for road registration. With 4 links you need much more compliant bushings to gain the same articulation as 3 link with much firmer bushings. It is also more difficult to find adequate operating room for the 4th link without altering too many other components. Bill.
shut up dave. don't complicate things!
mike there is plenty of tech available in this group too: http://groups.yahoo.com/group/Volvo303/
mike there is plenty of tech available in this group too: http://groups.yahoo.com/group/Volvo303/
Thanks everyone for the advise.
Dave, as I mentioned in my first post, this vehicle is only used off road so road worthty cert. is not the issue. What I am looking for are links that will provide good articulation, stability and prevent axle wrap, which if I understand correctly, is more of a problem with portals. I intend to use coilovers front and rear.
Bill, thanks for the advise on your 3 link setup. Will this setup allow full turning with 37in tyres without them snagging on the radius arms?
Regard
Michael
Dave, as I mentioned in my first post, this vehicle is only used off road so road worthty cert. is not the issue. What I am looking for are links that will provide good articulation, stability and prevent axle wrap, which if I understand correctly, is more of a problem with portals. I intend to use coilovers front and rear.
Bill, thanks for the advise on your 3 link setup. Will this setup allow full turning with 37in tyres without them snagging on the radius arms?
Regard
Michael
Sorry Mike..
Ohh...I was only joking about the RWC..Rugby World Cup!
Not implying anything about Road Worthies!
Dave
landy_man wrote:...and dont mention the RWC either
Ohh...I was only joking about the RWC..Rugby World Cup!
Not implying anything about Road Worthies!
Dave
Last edited by DaveS3 on Thu Jun 10, 2004 5:24 pm, edited 1 time in total.
Land Rover Discovery - GQ conversion underway
Who is online
Users browsing this forum: No registered users and 3 guests