Hi,
Having problems with my GU starting in the cooler Sydney winter mornings.
I am finding I have to crank the car for 8 sec before it will start, sometimes this has to be done twice.
If I've been driving and switch off I can start it again straight away no problems.
I've checked the glow plugs and they all measure approx 1.2ohms each,
0.8 when all connected in parallel .......this dosen't add up if I use the resistance equations ....but I think this is not the problem.
I can't say this for sure but the amount of time the glow plug indicator is on seems to be the same amount of time be it Summer or Winter when the car has been sitting Idle for extended periods of time.
I'm leaning towards the coolant temp sensor being faulty but I want to know the resistance value specs of it when it is cold and hot.
Thanks
Paul
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Starting Problems with TD3.0L GU 2000
Who is online
Users browsing this forum: No registered users and 0 guests