Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

brake line to front 80 series diff

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 70
Joined: Wed May 20, 2009 5:47 pm
Location: WARNEET

brake line to front 80 series diff

Post by tiny80 »

hi there i have a 80series with 3inch king springs gone to 4inch shock
drop has improved heaps so much i need new brake lines again
any one know where i can get some this week in melb

all so any one know how to tie down coils so i dont have to use a coil spacer as this will add to liftwhich i dont need
lifted and locked 80 series landcrusier
turbo 1 fzfe straight gas 35" claws and heaps more crap inside
Top
Posts: 804
Joined: Thu Aug 07, 2008 9:44 am
Location: Perth

Post by pinkfloyddsotm »

just weld a nut in the bottom of the coil mount , with some bent flat bar to hold the very last coil down and bolt that into the nut you welded in the coil moutn
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Better Brakes, or any brake joint. Take the car in and they should be able to measure and supply a braided line to replace yours.

Their branch in Bayswater did mine.

Cheers
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest