Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux no reverse lights

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 20
Joined: Thu Feb 25, 2010 6:13 pm
Location: tgon vic

hilux no reverse lights

Post by v6delux »

my hilux has no revrse lights globes are fine working ln106 96 model i dont think is an earth issue as the wold tailings would be out any help most welcome cheers
Posts: 68
Joined: Thu May 21, 2009 8:27 pm
Location: tassie

Post by brissle »

check the switch on the gear box
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

You need one of these..

Image
Posts: 20
Joined: Thu Feb 25, 2010 6:13 pm
Location: tgon vic

Post by v6delux »

have check its hooked up how do you test the sensor itself cheers shane
one of them switches would be nice where do u get em from i plan to hook up big reverse lights
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

v6delux wrote:have check its hooked up how do you test the sensor itself cheers shane
Take it off the box and plug it in. Im guessing it would be some sort of position switch/contactor.
Posts: 20
Joined: Thu Feb 25, 2010 6:13 pm
Location: tgon vic

Post by v6delux »

yamaha__308 wrote:
v6delux wrote:have check its hooked up how do you test the sensor itself cheers shane
Take it off the box and plug it in. Im guessing it would be some sort of position switch/contactor.
thanks bloke ill have a crack and see how i go if the sensor works what else could it be ?
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

Same place you get these...

Image

[/img]Image

Image

[/img]Image
Posts: 68
Joined: Thu May 21, 2009 8:27 pm
Location: tassie

Post by brissle »

check with a test light for power on one side then the other if only on one side its screwed, while in reverse and ignition on.
Posts: 20
Joined: Thu Feb 25, 2010 6:13 pm
Location: tgon vic

Post by v6delux »

[quote="crozza"]Same place you get these...

aaaaaahaa thats where
Posts: 214
Joined: Fri Jan 11, 2008 6:22 pm
Location: ACT

Post by crozza »

GIDDYUP !!!
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests