Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
body mount bolts
body mount bolts
cant get the bolts loose for the rear body mount, it just spins the nutty thingy HELP. this is the only one i have tryed has any onelse had this problame are the other ones a c*nt to?
cheers
cheers
I'm not sure if all modle's are the same , but in my shorty the rear's are a 12mm fine thread with captive body nuts .
The rest are 10mm fine bolts that pass through the floor of the body . the rear's can be a pain when the welds have brocken on the body nuts . when mine did the same as yours , I cut the head of the bolf off from the bottom . Then just pushed it up through the floor . you just need to check where the captive nuts have brocken to make sure it will pass through the hole in the top skin of the floor pannel .
hope this helps
The rest are 10mm fine bolts that pass through the floor of the body . the rear's can be a pain when the welds have brocken on the body nuts . when mine did the same as yours , I cut the head of the bolf off from the bottom . Then just pushed it up through the floor . you just need to check where the captive nuts have brocken to make sure it will pass through the hole in the top skin of the floor pannel .
hope this helps
Who is online
Users browsing this forum: No registered users and 2 guests