As above. Any of our metallurgy buffs know what grade (ASTM SAE etc) steel OME use for their coil springs. Or what the Shear Modulus is (I get between 50 and 70 GPa)
Cheers
Edit: Before I get beaten around the head by said buffs I'm wondering if shot peening and scragging will change the numbers from standard.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Grade or Shear modulus of OME coil steel
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Grade or Shear modulus of OME coil steel
Last edited by PCRman on Fri Apr 09, 2010 11:10 am, edited 1 time in total.
Give a man a fire and he's warm for the day, but set fire to him and he's warm for the rest of his life
'02 NM GLS 3.2DID ARB bar Bushskinz steps Rhino bars front air locker OME susp 265/75R16 AT's
'02 NM GLS 3.2DID ARB bar Bushskinz steps Rhino bars front air locker OME susp 265/75R16 AT's
Who is online
Users browsing this forum: No registered users and 1 guest