Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

opinions on portable compressors

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 62
Joined: Sat Jul 05, 2008 6:21 pm
Location: south-west of the north-east frontier

opinions on portable compressors

Post by patrolla »

looking for a portable compressor capable of inflating 36" simex's from low pressures with a decent warranty.

opinions please on brands and prices please!
gq with stuff
Posts: 1380
Joined: Tue Mar 18, 2008 11:40 am
Location: Perth, WA

Post by bakerboy »

how much do you want to spend? how long do you want to wait? duty cycle you are looking for?
mike_nofx wrote:Is "Athol" what people with a lisp call him??
RAY185 wrote:I think it's delightful! So does my wife Bill.
Posts: 1679
Joined: Fri Nov 08, 2002 7:06 am

Post by Ferwoaza »

I've got a portable ARB one in the hard case, does my 285's fine, switches off when I remove it from the tyre, and did 5 cars in a row at easter :D 2 year warranty I think..
Posts: 62
Joined: Sat Jul 05, 2008 6:21 pm
Location: south-west of the north-east frontier

Post by patrolla »

no more than 400 but less if possible
5 mins tops per corner.
so therefore has to be able to run for 20mins continuous
gq with stuff
Posts: 399
Joined: Sat Oct 31, 2009 9:16 pm
Location: Nth Richmond. NSW

Post by Black Bull »

I doubt if anything available under $400 is going to pump up a 36" tyre from 10 - 30+ pounds in 5 mins

Keep in mind your average 240v compressor tank is about 60L. each tyre would be nearer 100l capacity

IF you want fast fill capacity your going to need some type of receiver and preferably Dual compressors like the Vivair ones, gunna cost a lot more than $400
God of Athiests
Posts: 8336
Joined: Thu Aug 07, 2003 2:14 am
Location: Brownsville

Post by DamTriton »

patrolla wrote:no more than 400 but less if possible
5 mins tops per corner.
so therefore has to be able to run for 20mins continuous
want vs need

Everyone would like to only spend 1 minute per corner for $50.

Be realistic with what you NEED.
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

compressor

Post by noelb1 »

hi mate prob go for a bushranger (viair ) supermax approx $495 runs good airflow at pressure n should do wat you want in the required time. or you can go for the new ARB or the bushranger max air2 these will do the job adequately little bit slower than the supermax n also a little bit cheaper but still good n reliable and this is coming from actual experience with these compressors and tyre sizes in the real world not on a test bed in perfect conditions. ( remember that 99.999999999% of manufacturers measure their airflow a 0 psi not at working psi. if you get on the viair (sp?) website it has all the flows rates at working pressures for the bushranger comps )
Posts: 42
Joined: Fri Apr 11, 2008 3:25 pm
Location: N/E Victoria

Post by Cyrel »

I Run a blue tounge and it dose the job fine. Fan cooled and I built an alloy box around it to fit in my draws. if you want more air try the twin version.
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

A Sanden 508 is the only option that will do that for under $400, and that will involve used parts and booty fab.

It will kick ass when you've finished the job though.
This is not legal advice.
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

chimpboy wrote:A Sanden 508 is the only option that will do that for under $400, and that will involve used parts and booty fab.

It will kick ass when you've finished the job though.
x2 build an endles air unit from an aircon compressor, or buy one already modded with brackets to suit ur engine.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Posts: 103
Joined: Thu Jul 16, 2009 6:54 pm
Location: somerville, victoria

Post by jemmos »

i got a 4h grande from 4h.com. pumps up 4 35s from 20 psi to 35 psi in bout 10 min. cheep 2 bout $300. i got it hard wired in under tray tool box, with hose runnig out. it has pumped up 4 sets of 35s from 20 psi in a row. dunno the duty cylce. i think is a cheep copy of a boss?? hope it helps.
Posts: 103
Joined: Thu Jul 16, 2009 6:54 pm
Location: somerville, victoria

Post by jemmos »

sorry just checked thier site, dont think they sell them any more. but the grande boss is $395 and will do what previously stated easily!! hard wire it and let the good times roll. on full inflated tyres lol :finger:
Posts: 1451
Joined: Sat Mar 18, 2006 1:25 pm
Location: hilux is in NSW.. Im in WA again

Post by brad 93hilux »

jemmos wrote:sorry just checked thier site, dont think they sell them any more. but the grande boss is $395 and will do what previously stated easily!! hard wire it and let the good times roll. on full inflated tyres lol :finger:
Nope they dont....i tried to buy one a month ago...

I bought 2 150 L/m el-cheapo ones off ebay, cost me $200 for the 2 compressors and $50 for wiring and fittings... I have them hooked up to a water/air seperator and the air lines run 2 to 1 making it 300l/min free flow.

For $250 i can complain and only takes 8 mins to pump up the 35's from 10 psi to 30 (all 4)

I was gonna buy a heaps expensive one, but talked to a few guys on here that have done the same and for the price, if one went in a year/ two i'd be happy (plus there is still one there to use)

Just a idea... works awesome

Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests