And how do you get the front and rear diff ratios the same
[/b][/list]
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Best rear Diff for my Feroza
Moderator: Tiny
Best rear Diff for my Feroza
Question : What would be the best diff to put under the rear of my feroza
And how do you get the front and rear diff ratios the same [/b][/list]
And how do you get the front and rear diff ratios the same
[/b][/list]
Re: Best rear Diff for my Feroza
mytuck wrote:Question : What would be the best diff to put under the rear of my feroza
And how do you get the front and rear diff ratios the same
If you want 2 fit a locker 2 the rear I'd go for a complete hilux diff and axles. The hilux came out with the same 5.285 diff ratio as the feroza.
James
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
94 cxi feroza- coiled rear!!! SOLD !!!!!
05 s/cab 5L-e hilux- bring on the mods
Q1:
Whats the difference between Hilux und feroza axle-width?
About 3 inches
Q2:
Which Hilux model? buid when?, between? from which engine?
If you're gonna do the swap, then go for an IFS model rear axle......slightly wider than the Solid axle version.......I think that means anything from mid 90's and on !!
While you're at it.....just SAS the front as well
Use an early model solid axle with IFS hubs for the extra width
Whats the difference between Hilux und feroza axle-width?
About 3 inches
Q2:
Which Hilux model? buid when?, between? from which engine?
If you're gonna do the swap, then go for an IFS model rear axle......slightly wider than the Solid axle version.......I think that means anything from mid 90's and on !!
While you're at it.....just SAS the front as well
Use an early model solid axle with IFS hubs for the extra width
[color=orange] BESTY [/color]
GU4800
GU4800
Who is online
Users browsing this forum: Bing [Bot] and 21 guests