Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

What offset to fit 35's on 100...

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 134
Joined: Sat Aug 30, 2008 7:06 pm
Location: gold coast

What offset to fit 35's on 100...

Post by twocs »

Solid axle 105 with a 4" suspension lift. What else should I need to fit these under ? Cheers...
105 series. Tough dog adj's, snorkel, drawers, IBS, MTZ's, bar, winch...
Top
yamaha12
Banned
Posts: 82
Joined: Sun Apr 11, 2010 2:45 pm
Location: mt isa

Post by yamaha12 »

probly just standard rims will fit em aye but i have -23 off set on my 80 series 8 inch rims fairly medium off set just stick out side the guards
80's :)
Top
Posts: 101
Joined: Sat Feb 21, 2009 8:27 am
Location: Brisbane

Post by Feass »

yeah ive had 315/75/16 on the stock 16x8 steely
Top
Posts: 2
Joined: Wed Mar 10, 2010 7:18 pm
Location: SYDNEY

Post by raymondp90 »

just wondering where u can get offset rims from or done
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

I had 20 mm offset. Couldnt find any for sale so i got my GXL rims modified at "spot on wheel repairs" Wollongong.

Plus needed 2" bumpstop extensions on the rear, front was ok.

Need to remove front mud flaps, and trim the plastic behind the flap.

Standard rims/bumpstops will fit them, as long as you dont plan to flex it up at all, or dont mind a bit of guard rubbing in the rear.
Top
yamaha12
Banned
Posts: 82
Joined: Sun Apr 11, 2010 2:45 pm
Location: mt isa

Post by yamaha12 »

just buy a new set of steelies from a wheel shop and tell them the offset you want
80's :)
Top
User avatar
mike_nofx
Master of my own domain
Posts: 1516
Joined: Mon Apr 21, 2008 8:01 pm
Location: Shellharbour, NSW

Post by mike_nofx »

yamaha12 wrote:just buy a new set of steelies from a wheel shop and tell them the offset you want
they don't make any decent offset rims off the shelf for 105
They will have to be a custom set and it will be $$$
Top
Posts: 50
Joined: Tue Nov 24, 2009 11:16 am
Location: Medowie

Post by RunnerMitch »

by decent are you refer to alloy rims? Because arent 105 just the same standard 6 stud pattern on the 80 series. Surely there would be a set of sunrasia rims out there with the right offset.
Top
Posts: 438
Joined: Thu Jun 24, 2004 4:58 pm
Location: wollongong

Post by Stackson45 »

105 5 stud.
Landcruiser UTE 1996 FZJ75 - SPOA, 35"s,
extended chassis, poor mans extra cab, 4.56 diff gears, Lockright front, chinese air locker rear...
Top
Posts: 421
Joined: Fri Dec 05, 2003 12:35 pm
Location: Tweed coast

Post by 98lux »

I think mine are -15
if ya gona rev it, Chev it
Top
yamaha12
Banned
Posts: 82
Joined: Sun Apr 11, 2010 2:45 pm
Location: mt isa

Post by yamaha12 »

hmm just put the 35s on the stock rims and see how they go i suppose that sucks that there isnt a good amount off offset avalable in a steel rim for the 105 though
80's :)
Top
Posts: 49
Joined: Fri Jun 12, 2009 11:48 am
Location: Wollongong

Post by BJMorgo »

Try asking procomp - they have all sorts of rim sizes, stud patterns and offsets.

http://www.procomp.com.au/Default.asp?M ... CK_CRAWLER

Regards,
Paul
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

If you can't get the wheels you want, buy some good quality wheel spacers, they aren't legal but neither are the 35s.
Don't take life too seriously...it isn't permanent.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 46 guests