Page 1 of 1
extractors off hj75 fit a hj60?
Posted: Mon May 17, 2010 12:30 pm
by sonny
hi i was wondering if extractors off a hj75 will fit onto a hj60 without any mods?thanks
Posted: Mon May 17, 2010 1:17 pm
by RAY185
According to this:
http://www.pacemaker.com.au/toyota_6cyl.html
Same headers fit HJ 45/47/60/75. So I'd take that as a yes.
Posted: Mon May 17, 2010 3:20 pm
by sonny
thanks
Posted: Mon May 17, 2010 5:43 pm
by Wambat
as long as its the same motor, my 75s 2h extractors are of a 60 series
Posted: Mon May 17, 2010 7:24 pm
by BadMav
Off/on topic... The turbo kit I had on my 75 was off a 60.
Posted: Fri May 21, 2010 8:08 pm
by GO79
off topic, the 3f 80 series extractors dont fit on the 3f 75 series
Posted: Sat May 22, 2010 11:15 am
by Wambat
thats probably because the their could be alot of difference between the 80 and 75, where there isnt that much between the 60 and 75. if they have more room when making the extractors they would take it in my opinion, i would if i was custom making extractors, i would make my bends less sharp and easyer to get to the nuts on the flange.
but thats only a guess as to why