Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Possible Hot new Product for waterproofing electricals?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 16
Joined: Sun Sep 06, 2009 7:33 am
Location: Brisbane

Possible Hot new Product for waterproofing electricals?

Post by coolfishluke »

Check this out

http://www.strike-hold.com/

I work in yachting and this has come to our industry from someone who spied it at a gun show in the USA. Its application to 4WD'ing could be awesome - not sure if anyone is importing or distributing it yet though?
Top
Posts: 22
Joined: Sun Feb 14, 2010 10:31 am
Location: rocky

Post by bigredbarn »

could prove very usefull thats for sure
Top
Posts: 280
Joined: Tue Feb 16, 2010 1:21 pm
Location: Werribee

Post by MrGrim »

WOW .....lost for words
71 fj40 front shackle reversal +3" , 55 rear springs +3", 35 15.5 claws , 60 diff's 4wheel disc's , SOON TO BE WINDSOR V8 + 5 speed
74 fj40 stock but very clean
84 bj40 3b stock and unloved
Top
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

from what i can figure.... if you heavily coated your entire engine. it would only be for the better...
hmmmm.... would like to get my hands on a can or three... test it out.
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I would love to know if the drill and light were fed from a standard socket outlet, or an isolated supply.
Top
Posts: 765
Joined: Fri Mar 12, 2010 7:28 pm
Location: Fixing something else the kids have broken

Post by BadMav »

Not knocking the product but, people you do realise that most modern high pressure petrol fuel pumps run submerged in the fuel tank and the fuel actually passes through the body of the motor past the armateur and brushes. I've also used a cordless drill (yes, I know not 240v or 110v like the demo guy) underwater before with a worry. The light bulb fitting underwater is impressive tho.
Don't take life too seriously...it isn't permanent.
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

would be awesome for stopping petrol's dieing when they see water
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Yom
Posts: 1233
Joined: Tue Oct 16, 2007 1:13 pm
Location: Brisbane

Post by Yom »

this stuff also could be better than fish oil/lanolin products for corrosion protection.

i have noticed lanolin is not very good when it comes to electrical stuff, it seems to be a bit of an insulator (bad)
Top
Posts: 79
Joined: Mon Dec 04, 2006 5:53 am
Location: Middlemount, QLD

Post by diby_2000 »

I have been told that this is no more than snake oil an that this is the stuff you want

I have seen some demos on you tube. Looks to be just as good but it has been designed and used for this purpose before.
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

all of that is possible without oil.
An a/c drill motor is DC and the same as the cordless above (higher voltage though. Hook one up to a battery and watch it spin

And if the water is pure the light will work too.

as long as the operator has insulated shoes / not earthed and uses one hand you shouldn't get a shock - (like hanging on one power line) Also the voltage may be lower than 240 - in the states its 110 (although current is higher)
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 314
Joined: Tue Aug 16, 2005 10:02 pm
Location: Ferntree Gully. Melbourne.

Post by Rhysta »

Had a rep come around to work and show the mechanic something very similar to this, was going on about being able to do very similar things with the light globe trick and plug fittings etc.

NFI what the name of it was but.. :cry:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests