I have done a search and haven't found a definite answer to my question
I'm still in the process of doing my suspension I run a full ruf and due to moving the diff so far forward my shocks and bumpstops didn't line up. I have cut the shock mounts and bumpstop mounts off I am making custom shock mounts
I was thinking about mounting the bumpstops from outside the chassis to underneath the chassis with a 40 mm extension
will this work and will I have any problems with this setup?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Inboarded bumpstops?
It's the way I do all my front ends. I think I've done 5 or 6 cars this way. It works a treat. You'll pick up plenty of articulation due to the added leverage.
The added risk of bending the axle is a fair point. We haven't experienced this as a problem, but we don't tend to jump our junk. If you hit dunes a lot it might be a concern - that's where most of the front axle bendage seems to occur.
Steve
The added risk of bending the axle is a fair point. We haven't experienced this as a problem, but we don't tend to jump our junk. If you hit dunes a lot it might be a concern - that's where most of the front axle bendage seems to occur.
Steve
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests