Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.6 diffs into v6

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 264
Joined: Tue Aug 31, 2004 4:57 pm
Location: New Zealand

Contact:
Contact Rotazuk

1.6 diffs into v6

Post by Rotazuk »

Hello
Couple of questions , the search answered them partly .

Is a 1.6 vitara 12 bolt rear diff head a straight swap into a 95ish v6 ? or do you have to swap the ring and pinion . Is the complete rear diff the same ? Also will a 10 bolt rear diff head bolt in also ?

I think I have to swap the ring and pinion on the front diff as its a 22 spline diff . The search said this was possible . Would a 26 spline ( later model 1.6 ) front diff bolt straight into a v6 ?

Cheers
Chris
Top
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

The rears are all interchangeable if you are swapping a complete centre. It doesn't matter if it is 10 or 12 bolt, that is only an issue if you are just swapping the ring and pinion.

To convert from 22 to 26 spline in the front just swap the side gears over.

There is a slight difference (a few mm) in the left hand side inner axle shaft length between various 26 spline equipped models. I can't remember which had what though :oops:
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 43 guests