Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

To grease? Or not to grease? Shakesphere would hate me

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 61
Joined: Mon Dec 29, 2003 11:16 pm
Location: Tassie

Contact:
Contact captahab18

To grease? Or not to grease? Shakesphere would hate me

Post by captahab18 »

As the title suggested.

Is it a worth while idea to grease up those tie rod ends so that they may be just a tad easier to move when the day comes to adjust or to replace?

Or would greasing those puppies up make a reciepe for disaster ...in otherwords lubed up tie rod ends making rods even with clamps moveable under use?

Or or...could the grease along with time and a collection of dirt/dust fuse the tie rod ends to the tie rods even more so than with out grease?

Good or bad idea? Suggestions?

-Capt*Analhab
"I can picture in my mind a world without war, a world without hate. And I can picture us attacking that world, because they'd never expect it." - Jack Handy
Top
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

What you need is "Neversieze", if its wize to lube this area is another thing.
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Top
Posts: 61
Joined: Mon Dec 29, 2003 11:16 pm
Location: Tassie

Contact:
Contact captahab18

Post by captahab18 »

Ok then....does anyone know if its wise or unwise to lube the tie rod ends in their tie rods/relay rods?

Waiting to find out before i go and bolt them on.
"I can picture in my mind a world without war, a world without hate. And I can picture us attacking that world, because they'd never expect it." - Jack Handy
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

I always wipe them with grease so I can adj later, and it helps stop water running up inside arm.
They dont spin during use.

Bazzle
Top
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

yes grease. once you've got the locks done up they can't spin.
Free air locker to the first 20 callers!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 32 guests