Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

disco 3.5 v8 wiring

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 10
Joined: Sat Sep 19, 2009 3:58 pm
Location: sunshine coast QLD

disco 3.5 v8 wiring

Post by andyGQ »

hey guys i have a 3.5 v8 landrover motor that i ahve put into a hilux hmmm just wondering if any1 had any info on wiring the coil to the ignition module on the side of the dizzy it is a 2 pin module was just unsure because is the rover harness it is part of the main harness not the engine harness ans as of yet havnt been able to track dowm a wiring diagram that matches the colour codes on the ecu harness thanks
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

I would repeat this question in the Rover section.
This is not legal advice.
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests