Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff ratio's

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Diff ratio's

Post by My Lil Lux »

pinion is stuffed in my 92 lux looking to run 4.8:1 ratio , have been told the centres out of a 80-82 petrol will do the job, is this the only model or can someone tell me what other models ran these ratios :?:
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

secand gen petrols got them and also third gen 2wd auto 2.8D got em
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Posts: 391
Joined: Wed May 26, 2004 6:20 pm
Location: Seaham NSW

Post by My Lil Lux »

thanks :) would this be a good ratio for running 33's on road and 35's in bush :?:
Posts: 2136
Joined: Mon Dec 01, 2003 6:36 pm
Location: Lake Macquarie

Post by 4sum4 »

My Lil Lux wrote:thanks :) would this be a good ratio for running 33's on road and 35's in bush :?:


Yep and if your going to get them from the wreckers ask for the front centre.
[url=http://downunder4x4.net/forum/showthread.php?t=1650]86 Hilux[/url]
and a 84 extra cab



If Rocks Had P^ssies Our Lives Would Be Perfect :D...
Posts: 2149
Joined: Sun Oct 20, 2002 6:59 pm
Location: gold coast, australia

Post by NICK »

4sum4 wrote:
My Lil Lux wrote:thanks :) would this be a good ratio for running 33's on road and 35's in bush :?:


Yep and if your going to get them from the wreckers ask for the front centre.



thats a waste of time, go down and inspect the gears yourself.


NICK
TECH SCREW GURU
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests