Guys,
Im aware the ideal way to help my shorty keep its front legs on the ground is with wheelbase extension and possibly little winch on the front diff.....
Unfortunately i havent got the time to sort that before sundays comp and have a quick question....
Im looking to run my 8000 pound low mount in the standard front bar position and run it back to my front diff just to pull it down a couple of inches to keep the weight on the ground for very steep climbs....
has anyone on here done exactly this? run a quick little guide to the front diff with a couple of bars to run over and under to allow the cable to run from vertical above the diff???
Im aware i can just hook it down to the diff as it will pull it too far foward so i need to run it straight back and down...
anyone who has done this with there front diff would be helpful, especially pics.
screwy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ winch onto front diff
GQ winch onto front diff
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Re: GQ winch onto front diff
I bloke I know runs water in the front wheels , (old tractor tech from the farm ) he said it worked , but I imagine it would be harder on CV's and not sure at speed . He was doing winch comps.
Nup not telling
you'll have to find out yourself
you'll have to find out yourself
Re: GQ winch onto front diff
It might stiffen the front up causing it to bounce when you hit a bump on the climb which could be worse than just taking it easy on the hill climbs.Screwy wrote:Guys,
Im aware the ideal way to help my shorty keep its front legs on the ground is with wheelbase extension and possibly little winch on the front diff.....
Unfortunately i havent got the time to sort that before sundays comp and have a quick question....
Im looking to run my 8000 pound low mount in the standard front bar position and run it back to my front diff just to pull it down a couple of inches to keep the weight on the ground for very steep climbs....
has anyone on here done exactly this? run a quick little guide to the front diff with a couple of bars to run over and under to allow the cable to run from vertical above the diff???
Im aware i can just hook it down to the diff as it will pull it too far foward so i need to run it straight back and down...
anyone who has done this with there front diff would be helpful, especially pics.
screwy
Cris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Re: GQ winch onto front diff
I would imagine that there would be a constant hard shock going back through to the winch when the diff tries to drop back down too. Maybe a soft mount could remedy this, but you may also shag your winch gearbox through shock loading.
Re: GQ winch onto front diff
Not concerned about this. It will only be used in a certain way not constantly. For example to limit the front end from unloading once at the top of the hill by keeping the centre of gravity lower with the winch and release it as soon as up the step. Again this info isn't what im after. It's whether anyone has done anything similar to this on a standard setup gq front end??????
Cheers
Cheers
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Who is online
Users browsing this forum: No registered users and 0 guests