G'day All.
Yesterday after a day of great four wheel driving I got a flat, had a mate put my spare on Due to a shoulder injury, And off we went.
Heading back into lithgow down chifley Rd, At the top of scenic hill I felt the front left drop, A loud grinding noise, and seen my wheel overtake me.
Disc/hub assembly dug into the bitumen and put a huge gouge in the road about 25 metres long to where I pulled it up in the break down lane.
What has happened, From what I can see the mount to the diff on the passenger side for the Control arms has Broken at the bottom.
Is it a viable option to attempt to weld this back onto the diff, Or just get a whole new diff?
That is providing nothing else is Stuffed, Besides the disc. It's pretty much gone.
Any help/comments Much appreciated.
Cheers
Jono
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Welding Front Diff.
Who is online
Users browsing this forum: No registered users and 58 guests