Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diy snorkel
Moderator: -Scott-
Diy snorkel
Hey guys has anyone posted a thread of how to build one of those stainless snorkels??
Re: Diy snorkel
hey mate pm me with your email and i will email you an article i have on how to do it
Re: Diy snorkel
What exactly do you need to know??
Get some straight sections and some bends of stainless steel of the required diameter.
Plan how long it will be, and tig weld it together.
Cut a hole in the guard and inner guard, mount to the airbox, mount to the apillar and fit a hat.
Job done.
Im not trying to be a smart arse, but thats pretty much all there is to it.
Just make sure that when you are welding the pieces together, that the pieces are lined up properly.
As for mounting to the apillar, mine has 2 bits of flat bar(SS), and at the end that goes on the apillar, the bar goes out then back in again, kind of like a chicane shape, it clamps on each side of the gutter, and a screw/nut holds the clamp together. And for what it is, its pretty solid.
Hope this helps.
Get some straight sections and some bends of stainless steel of the required diameter.
Plan how long it will be, and tig weld it together.
Cut a hole in the guard and inner guard, mount to the airbox, mount to the apillar and fit a hat.
Job done.
Im not trying to be a smart arse, but thats pretty much all there is to it.
Just make sure that when you are welding the pieces together, that the pieces are lined up properly.
As for mounting to the apillar, mine has 2 bits of flat bar(SS), and at the end that goes on the apillar, the bar goes out then back in again, kind of like a chicane shape, it clamps on each side of the gutter, and a screw/nut holds the clamp together. And for what it is, its pretty solid.
Hope this helps.
MrsForby wrote: Oh I desperately truly love the taco.
Who is online
Users browsing this forum: No registered users and 18 guests