Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?

Post by WICKED »

Can I put a MQ Rear ARB Locker into a GQ 4.3 Hi-Pinion Centre?

Are the Bolt Patterns the same on the GQ Low and Hi-Pinion 3rd Members? (Front's)

I have an MQ ARB Low Pinion in my Front GQ Leaf Diff and want to make it Hi-Pinion for a better angle and anlinment.

Cheers
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?

Post by WICKED »

If this Makes a difference- When I changed from the GQ Centre to the MQ centre i drilled and tapped the housing but kept the original tapped stud hole's there.

Image
Image
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?

Post by WICKED »

Any one???
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?

Post by pongo »

was talking to dumbdunce the other day and he said something about gears running the wrong way round.

I got NFI really, but have the free bump
Top
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?

Post by WICKED »

pongo wrote:was talking to dumbdunce the other day and he said something about gears running the wrong way round.

I got NFI really, but have the free bump

In the Locker??

:)
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?

Post by patrol man »

You can redrill your MQ ARB locker to suit the GQ diff gears the difference is the MQ using 10mm bolts on a 180mm diameter, where as the GQ use a 12mm bolt on a 176mm diameter crown wheel. If you buy a new top hat for a GQ, ( cover plate) and use this as a guild to redrill the old center, position it half way between the old holes and redrill to suit. this is what I did to fit a MQ rear locker into my GU front, cheers.
Living the dream on the hill that floods
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 49 guests