Page 1 of 1
MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?
Posted: Mon Jun 28, 2010 5:00 pm
by WICKED
Can I put a MQ Rear ARB Locker into a GQ 4.3 Hi-Pinion Centre?
Are the Bolt Patterns the same on the GQ Low and Hi-Pinion 3rd Members? (Front's)
I have an MQ ARB Low Pinion in my Front GQ Leaf Diff and want to make it Hi-Pinion for a better angle and anlinment.
Cheers
Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?
Posted: Mon Jun 28, 2010 5:07 pm
by WICKED
If this Makes a difference- When I changed from the GQ Centre to the MQ centre i drilled and tapped the housing but kept the original tapped stud hole's there.
Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?
Posted: Tue Jun 29, 2010 10:10 am
by WICKED
Any one???
Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?
Posted: Thu Jul 01, 2010 5:35 pm
by pongo
was talking to dumbdunce the other day and he said something about gears running the wrong way round.
I got NFI really, but have the free bump
Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?
Posted: Thu Jul 01, 2010 8:21 pm
by WICKED
pongo wrote:was talking to dumbdunce the other day and he said something about gears running the wrong way round.
I got NFI really, but have the free bump
In the Locker??
Re: MQ (R) ARB in GQ Hi-Pinion in GQ Leaf housing (F)?
Posted: Fri Jul 02, 2010 6:47 pm
by patrol man
You can redrill your MQ ARB locker to suit the GQ diff gears the difference is the MQ using 10mm bolts on a 180mm diameter, where as the GQ use a 12mm bolt on a 176mm diameter crown wheel. If you buy a new top hat for a GQ, ( cover plate) and use this as a guild to redrill the old center, position it half way between the old holes and redrill to suit. this is what I did to fit a MQ rear locker into my GU front, cheers.