Outer Limits 4x4 Board

Hi all,
Would someone be able to tell if a ZD30 Airbox lid will fit on a RD28 Airbox base?

Also I have a RD28 Airbox and want to use a ZD30 lid on it what filter do I use in it.

Thanks in advance
David

hi david u should post up a new pick with the black rims on it . don't no the answer to the question sorry

moddedgu wrote:Hi all,
Would someone be able to tell if a ZD30 Airbox lid will fit on a RD28 Airbox base?

Also I have a RD28 Airbox and want to use a ZD30 lid on it what filter do I use in it.

Thanks in advance
David

All lids are interchangeable,and they all take the same filter

UGOTNUFN wrote:

moddedgu wrote:Hi all,
Would someone be able to tell if a ZD30 Airbox lid will fit on a RD28 Airbox base?

Also I have a RD28 Airbox and want to use a ZD30 lid on it what filter do I use in it.

Thanks in advance
David

All lids are interchangeable,and they all take the same filter

Well I \'m not so sure.... Cause my 3ltr lid will not sit down onto the base of my 2.8 GU airbox. There is a Lug thingy sticking out on the base and the square where air flow meter bolts to hangs lower than the seal of lid.

David

moddedgu wrote:

UGOTNUFN wrote:

moddedgu wrote:Hi all,
Would someone be able to tell if a ZD30 Airbox lid will fit on a RD28 Airbox base?

Also I have a RD28 Airbox and want to use a ZD30 lid on it what filter do I use in it.

Thanks in advance
David

All lids are interchangeable,and they all take the same filter

Well I \'m not so sure.... Cause my 3ltr lid will not sit down onto the base of my 2.8 GU airbox. There is a Lug thingy sticking out on the base and the square where air flow meter bolts to hangs lower than the seal of lid.

David

Ok that sounds odd,maybe i did it the other way. Maybe i put 2.8 on 3LTR

MMMMM now to remember

UGOTNUFN wrote:

moddedgu wrote:

UGOTNUFN wrote:

moddedgu wrote:Hi all,
Would someone be able to tell if a ZD30 Airbox lid will fit on a RD28 Airbox base?

Also I have a RD28 Airbox and want to use a ZD30 lid on it what filter do I use in it.

Thanks in advance
David

All lids are interchangeable,and they all take the same filter

Well I \'m not so sure.... Cause my 3ltr lid will not sit down onto the base of my 2.8 GU airbox. There is a Lug thingy sticking out on the base and the square where air flow meter bolts to hangs lower than the seal of lid.

David

Ok that sounds odd,maybe i did it the other way. Maybe i put 2.8 on 3LTR

MMMMM now to remember

Ok here are a few pics to better explain issue, Can anyone post up pics of their ZD30 lid setup please,

David
GU 2.8ltr airbox base and 2.8 Lid

GU 2.8 Base

GU 3Ltr lid on 2.8 Ltr Base

Lug on base stopping lid sitting right

moddedgu wrote:

UGOTNUFN wrote:

moddedgu wrote:

UGOTNUFN wrote:

moddedgu wrote:Hi all,
Would someone be able to tell if a ZD30 Airbox lid will fit on a RD28 Airbox base?

Also I have a RD28 Airbox and want to use a ZD30 lid on it what filter do I use in it.

Thanks in advance
David

All lids are interchangeable,and they all take the same filter

Well I \'m not so sure.... Cause my 3ltr lid will not sit down onto the base of my 2.8 GU airbox. There is a Lug thingy sticking out on the base and the square where air flow meter bolts to hangs lower than the seal of lid.

David

Ok that sounds odd,maybe i did it the other way. Maybe i put 2.8 on 3LTR

MMMMM now to remember

Ok here are a few pics to better explain issue, Can anyone post up pics of their ZD30 lid setup please,

David
GU 2.8ltr airbox base and 2.8 Lid

GU 2.8 Base

GU 3Ltr lid on 2.8 Ltr Base

Lug on base stopping lid sitting right

link no worky

JWB wrote: link no worky

Huh, What you can't see the pics???? They show on my PC are you logged in?

David

Also for any moisture or water that gets into the bottom of the air cleaner...is the only way of getting it out by removing the air cleaner completely and upturning it?

What's the lug do? Can't you just cut it off?

chunks wrote:What's the lug do? Can't you just cut it off?

I have no idea what the lug is for maybe someone with a GU2.8 airbox could post up a pic of their airbox so we could see what the lug is for cause I can't see anything bolting to it on my GU TD42.
Maybe I should just cut it off!

Can people that have this ZD30 lid on their setup post some pics please?

David