about to do baleno g16b dizzy conversion HELP!!!

[zooktastic]

hey fellas, my zook has pretty well crapped itself today so i have been forced to do the engine conversion this weekend, the motor is a g16b single coil dizzy motor, what have you guys done with the wiring? i will be using vitara cam and angle drive to make life easy, is there anything else i need to do?
any help will be greatly appreciated,

cheers mick

[zooktastic]

forgot to add its a 1989 swb wide track sierra

[V.W.Dave]

Hey guys, I am the lucky one that is helping Mick get this all done in 2 days. Mick forgot to say I have a 5speed bos that is already converted to fit onto a 1.6 and I know how to make the mounting plate for the passanger side mount. Any help would be greatly apreciated with the wiring. I have done the engine swop a few times now but I have never had to do the wiring. The coolant pipes and the layout of everything is a peice of piss.
I am good with wires and I have no problem lengthening the entire harness to get it to reach the glove box/ behind the dash. I just need to know if there are any crazy stupid random things I need to know.
I have heard there is something about the VSS and a check engine light. Please let me know. This entire job has to be done in a little over 48hours.
I am not sure if he has a auto harness or a 5speed harness. Micheal can you clearify that for the readers and can you get the ecu number off the back it will be 6N or something like that.

[nicbeer]

have u got the dash out of vit?

if so then u can swap the vss over from the cluster. if not u can run it without it ok but may have a slight miss under load i have heard