Page 1 of 1
Albright Solenoid Question
Posted: Sat Jul 24, 2010 4:54 pm
by red-tj
Iv almost finished replacing my 8274-50 Solenoid pack with an Albright.
My question is, dose the Albright need to use the thin earth wire leading from
the OE 4-pack of solenoids to the winch earth
Re: Albright Solenoid Question
Posted: Sat Jul 24, 2010 5:45 pm
by DamTriton
Not quite sure exactly how the Albright pack is supplied, but the solenoid pack WILL need an earth connected. I would assume that thin wire would be to earth the solpack not the winch
Re: Albright Solenoid Question
Posted: Sat Jul 24, 2010 9:08 pm
by red-tj
Im pretty sure that it is grounded by mounting tabs that hold the solenoid .
And that thin wire was to ground the pack that was mounted to the motor originally .
But I just want to make sure
Re: Albright Solenoid Question
Posted: Thu Jul 29, 2010 10:54 pm
by noodle
You wont need the small earth. From memory it acts as a safety mechanism for the switch.