My question is, dose the Albright need to use the thin earth wire leading from
the OE 4-pack of solenoids to the winch earth
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Albright Solenoid Question
Moderator: -Scott-
Albright Solenoid Question
Iv almost finished replacing my 8274-50 Solenoid pack with an Albright.
My question is, dose the Albright need to use the thin earth wire leading from
the OE 4-pack of solenoids to the winch earth
My question is, dose the Albright need to use the thin earth wire leading from
the OE 4-pack of solenoids to the winch earth
Re: Albright Solenoid Question
Not quite sure exactly how the Albright pack is supplied, but the solenoid pack WILL need an earth connected. I would assume that thin wire would be to earth the solpack not the winch
George Carlin, an American Comedian said; "Think of how stupid the average person is, and realise that half of them are stupider than that".
Re: Albright Solenoid Question
Im pretty sure that it is grounded by mounting tabs that hold the solenoid .
And that thin wire was to ground the pack that was mounted to the motor originally .
But I just want to make sure
And that thin wire was to ground the pack that was mounted to the motor originally .
But I just want to make sure
Re: Albright Solenoid Question
You wont need the small earth. From memory it acts as a safety mechanism for the switch.
Who is online
Users browsing this forum: No registered users and 14 guests