Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Where to source new transfer and pinion flanges for my FJ40?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Where to source new transfer and pinion flanges for my FJ40?

Post by vk7ybi »

Hi, looking for a local source of pinion and transfer case flanges, triple drilled or blank would be OK.. TIA..
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Re: Where to source new transfer and pinion flanges for my F

Post by hiluxmad »

try locktup4x4.com
they do the hilux ones and i think the early cruisers have the same spline
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Re: Where to source new transfer and pinion flanges for my F

Post by vk7ybi »

but not the same flange patterns..
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests