Hi there,
I have recently fully rebuilt my motor (after the nut holding the compressor wheel on the turbo came off and sent turbo through my motor) and now it seems to stop pulling at 3k rpm?
I have modified it with the following
t3/t4 turbo with high mount manifold
3" intake manifold inlet
3" straight through zaust
external wastegate set to 15psi
no intercooler yet as have run out of time
It pulls wikked hard up to 3k but then seems to just completely drop off? Ive tried winding the pump up a little more (I was running 12psi on the standard turbo and tuned the pump) and it still used to rev to 4k fairly easily but now it wont. Does anyone have any ideas?
Cheers
Turoa
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1hdt stops pulling at 3krpm??
Moderators: toaddog, Elmo, DUDELUX
Re: 1hdt stops pulling at 3krpm??
check the fuel pump timing.
Have you adjusted the boost compensator on the injection pump?
what are the specs on the turbo?
Have you adjusted the boost compensator on the injection pump?
what are the specs on the turbo?
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: 1hdt stops pulling at 3krpm??
Specs are .50 cold and .63 hot. Not adjusted boost compensator yet (because I have to move the pump to get the last bolt out) but its on my to do list. I am begginning to suspect pump timing though
cheers
cheers
Who is online
Users browsing this forum: No registered users and 0 guests