I have snaped the drop shaft on the steering gear box.
Is this somewhat easy to rebuild myself?
Recondishoned units are available?
Costing is it easier to just get a 2nd hand one?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Steering gear box (broken)
Moderators: toaddog, Elmo, DUDELUX
Re: Steering gear box (broken)
I assume your talking about the sector shaft in the steering box.
Im most cases when they break they destory the worm nut and sector bearings. - this is not always the case though.
Steering boxes are simple enough but alot of care must be taken in the sequence you pull them down and when puting them back together no pinching seals.
Service exchange units are usually around the 4-$600 mark depending on where u go.
Wreckers will usually sell them for around the 2-$400 mark.
Good luck
Im most cases when they break they destory the worm nut and sector bearings. - this is not always the case though.
Steering boxes are simple enough but alot of care must be taken in the sequence you pull them down and when puting them back together no pinching seals.
Service exchange units are usually around the 4-$600 mark depending on where u go.
Wreckers will usually sell them for around the 2-$400 mark.
Good luck
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Who is online
Users browsing this forum: No registered users and 0 guests