Hi,
Swapping my stock rover 3.54 CW&P for ashcroft 3.50 28/8 3.50 CW&P.
I haven't started yet and so don't know what shim change I will have to make, if any, I will have set the pinion height correct as well as
the correct drive/ gear pattern so am expecting a fair bit of install, check, review, change, reinstall pinion etc.,etc.
Don't want to pull it down and find there hard to get, as I 'borrow' a workshop on weekends and really can't leave the vehicle in there for weeks.
Does anyone know were you can buy these? i.e. someone with decent stocks or what O.D and I.D they are so can have some made if they are hard to get?
I have a list of LR part no's that I found.
Thanks
Clive
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rover Diff Pinion Shims Supplier Melb.
Moderator: Micka
Re: Rover Diff Pinion Shims Supplier Melb.
Clive, give ULR a try or Graeme at British car components. If you need a hand give me a PM as I would like to learn how to set up a gear set, I started one once made a mess of it and never tried again.
Michael.
Michael.
out of my mind, back soon.
Who is online
Users browsing this forum: No registered users and 42 guests