Hey guys,
Here's the situation, i have a good 4speed box with 170k kms on it, and a 5 speed with nearly 400k kms, the 5 speed 2nd syncro is worn, hard to get in when down shifting.
Can I take the majority of the 4 speed bits and use the fith gear extension housing to make a good 5 speed? Would imagine I'd have to use the 5 speed housing and swap everything over??
Cheers.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
MQ 4 speed bits iinto a 5 speed??
Re: MQ 4 speed bits iinto a 5 speed??
Not sure,
Though i can tell you that the gears are different 1-4 in the 4 speed compaired to the 5 speed....
You may be able to simply bolt the 5th gear extension housing onto the back of your 4 speed box but im not sure....
The internals of the 2 are similar but different ratios.
Screwy
Though i can tell you that the gears are different 1-4 in the 4 speed compaired to the 5 speed....
You may be able to simply bolt the 5th gear extension housing onto the back of your 4 speed box but im not sure....
The internals of the 2 are similar but different ratios.
Screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Who is online
Users browsing this forum: No registered users and 2 guests