hi im chasing a long spline to use for front tailshaft on my 40m ser cruiser.
its sprung over with reversed shackles
i have found a tailshaft mob can make one but they want a packet for it is there anything i can use from another cruiser that is longer
any help would be good thanx
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tailshaft splines
Moderators: toaddog, Elmo, DUDELUX
Re: tailshaft splines
hi, i had the same problem with my 40 when i did the same mods. i couldnt find another tailshaft to suit and anything custom made was going to cost the earth. i ended up having a new shaft made using some 65 and 50mm RHS that slid inside one another giving me over a foot of slip. works well and has survived a few comps and outings.
Cheers
Cheers
bj42 - built to last , not go fast
Re: tailshaft splines
Front shaft out of something else won't fit? I replaced my RJ70 rear shaft with a hzj105 front - had it laying around at work.
Re: tailshaft splines
.im looking at making some thing similiar for a hi lux you would'nt have any pics would you??
Re: tailshaft splines
I had a sprung over, reverse shackled 40 that I made a front shaft for using an old front Hilux shaft spline which is about twice as long as a 40 series spline. Same tube diameter but you have to get the tube length just right or it will pop out. Otherwise you can buy a PTO spline and female coupling from any ag supply/tractor shop depending on how much slip you need.
Who is online
Users browsing this forum: No registered users and 63 guests