Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

orbi valve

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

orbi valve

Post by Rhett »

I have just gotten a small char lynn orbi valve for one of my buggy projects, it has had water in it and sat for a while, am I going to be able to get it rebuilt or is it a lost cause? I can only spin the spud shaft a quarter of the way round then it siezes.
Its a wheelbase thing
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Re: orbi valve

Post by Z()LTAN »

they are pretty basic inside mate.

Pull it down and give it a quick rub with some 1200grit wet&dry then oil all the parts then put it back together.
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Re: orbi valve

Post by 11_evl »

i wouldnt think the seals are hard to get either. just match em up
michael
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Re: orbi valve

Post by Rhett »

took it to the yydro shop today, they say its too far gone :bad-words:
Its a wheelbase thing
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Re: orbi valve

Post by Willy Hilux »

Should have taken it to the "Hydro" shop not the "Yydro" shop. They may give you a better outcome. :D
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Posts: 2066
Joined: Mon Jun 09, 2003 8:17 pm
Location: Gympie

Re: orbi valve

Post by Rhett »

:finger: :finger: fat fingers, little keys.
Its a wheelbase thing
Top
Posts: 1167
Joined: Tue Jun 16, 2009 10:42 am
Location: campbelltown

Re: orbi valve

Post by MogLux »

Rhett
make sure you know and mark each peice when you pull it apart.... some if put back together will be come a motor and not a pump.....and when you go to turn the steering wheel it will continue to spin.
Who make it whats the model i may have rebuild instructions at work for it
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests